Page Comparison

...

1. On the left main navigation bar under Dashboard, click Create Activity.

2. Create a new activity.

   1. Click the dropdown forRequest Category and select Lead and Copper.

   2. Click the dropdown for Activity Type and select Lead and Copper Sample Site Plan.

   3. Input the community water supply that you work for, either by searching for the water supply by name or by the last 5 digits of the Public Water Supply ID (PWSID (, previously called WSSN, Example: 04312).

3. On the bottom right, click Create. Doing so will bring you to a new screen with an overview of the sample site plan submission.

4. On the left, under the section labeled Tasks, there will be a task that says Fill out form. Click Start Form.

5. At the top of the form, you will find some basic information about the water supply. If any of that information is incorrect, please contact your District Analyst.

6. Under that section you will see a section labeled Sample Site Requirements. Note that your sample site plan must contain enough sites to conduct standard monitoring. If you are uncertain how many sites that is for your supply, that number is listed below under Standard Number of Sites Required.

7. The next section is where you will add the sample sites. On the right side, click + Add Sample Site.

...